Before & After: Transform Your Garage in One Day (Full Plan)

Prep first

• Measure precisely: length/width, door openings, obstructions, cabinets.

• Choose surfaces: Vented for wet/snow-exposed areas; Solid/3D for dry work zones.

• Lighting plan: pick Hex 14/15/PRO based on area and ceiling height.

• Order list: tiles (≈ 6.25/m²) + 5–10% overage, edges/ramps, LED kit, optional suspension.
  
  

The one-day timeline (example)

1. Prep (30 min): sweep, vacuum; dry floor.

2. Dry-fit (45 min): snap a 3×3 m core; confirm pattern and orientation.

3. Cuts & edging (60–90 min): cut from tile underside; install ramps at doors.

4. Hex install (90–120 min): tape layout, mount rails/clips, connect power.

5. Finish (20 min): tidy cables, test, take your “after” photos.
   
   

Pro tips

• Leave a small expansion gap at walls.

• Flush mount for low ceilings; suspension at 3 m+.

• Label underside of tiles/rails by zone to make future changes easy.
  
  

Maintenance

• Vented: blow out or vacuum channels.

• Solid: mop; avoid harsh abrasives.

• LEDs: visual connector check 1–2×/year.
  
  

FAQs

• Can I use the space immediately? Yes—no glue or cure time.

• Noise underfoot? Rigid PP is firmer; add mats in ultra-quiet zones if desired.

• Drains and slopes? Use a cardboard template for precise cuts; maintain flow paths.

Catalog | FREE Consultation | Garage Configurator