The Most Versatile and Easy Setup for Detailers, PPF Installers & Wrap Shops

Why this combo works

Modular polypropylene (PP) tiles plus hexagon LED kits give you speed, safety and visibility. Tiles snap together, pieces are replaceable, and hex lights provide even, shadow-controlled illumination.

Flooring: choose surfaces by zone

• Wash/Detail Bay: Vented tiles for drainage. Channels keep the standing surface dry and grippy.

• Cutting/Install Zone (PPF/Wrap): Solid/3D tiles for a firm, flat surface that won’t “give” under squeegees or razor work.

• Walkways/Client Area: Use a contrasting color to guide traffic. Finish transitions with edges/ramps.
  
  

Quick flooring checklist

• Tile size: ~40×40×1.8 cm (≈ 6.25 tiles per m²)

• Add 5–10% overage for cuts/borders

• Order edges/ramps for door thresholds

• Keep a spare pack for future swaps/expansion
  
  

Lighting: see defects before your client does

• Color temperature: 6500K for crisp, daylight-like visibility on paint.

• Output target (lumens/m²): Basic work 400–600; detailing 700–1000+.

• Patterns: Hex 14 for a single bay, 15/PRO for double or deeper bays.

• Mounting: Flush for low ceilings; suspension for 3 m+.

• On-camera: Quality drivers minimize flicker for reels and YouTube.
  
  

Zoning your shop (sample plan)

1. Reception/Check-in: Solid tiles (quieter under foot), accent border.

2. Prep/Wash: Vented tiles; channels handle rinse water and foam.

3. PPF/Wrap: Solid/3D tiles; neutral colors to reduce color cast.

4. Photo Corner: Hex pattern with clean backdrop for consistent content.
   
   

Cable & tool management

• Run power along the room perimeter in tidy conduit or raceway.

• Mark a tool parking zone with color blocking.

• Keep floor anchors/rails out of walk paths to avoid trip points.
  
  

Maintenance & longevity

• Vented: blow out or vacuum channels.

• Solid: mop with neutral cleaner.

• LEDs: quick visual check of connectors every 6–12 months.
  
  

FAQs

• Can I use a floor jack on tiles? Yes—use a jack pad to spread point loads.

• Will tile color cast affect paint inspection? Choose neutral solids in the inspection zone to minimize reflections.

• Video flicker? Good drivers + stable power virtually eliminate it; test a short clip before final mounting.

Send your bay dimensions and ceiling height—we’ll return a layout with exact parts and a clean cable plan. Contact us.